Tundra Refrigerant Air Dyers

The new generation of Hi-line Fridge Dryers has been designed with energy efficiency and reliability at theforefront. Minimal energy consumption is crucial in today’scompetitive environment, the new Tundra dryer from Hiline will help drive down your energy costs by minimising pressure drop and lowering absorbed power.

The Direct Expansion technology offers a constant +3°C dew point at all times, unlike chilled mass dryers which can be as high a +10°C during its thermal cycle.The new single cell heat exchanger gives the most efficient transfer of heat at the lowest energy cost.

TheTundra has no PCB boards or controllers that tend tobe prone to faults and expensive to replace. By using proven worldwide components within the Tundra refrigerant system reliability is ensured. It also features within that refrigerant system, liquid receivers, linedryers, thermostatic expansion valves and a series ifsafety features to protect the Freon compressor and itscomponents.

The Tundra range has been designed to an engineering specification rather than a budget. Larger dyers up to 9988 cfm are available on short leadtime, although our standard range as featured here areavailable ex-stock at our Burton factory for next daydelivery. High Pressure and Thermal Mass are available to order, as is a full range of high performance oil and particle filters to suit each dryer.

Zero Loss Condensate Removal

The Tundra dryer range comes with the option to upgrade to a Hi-line ZLD zero loss level sensing auto drain. Standard product features our very own HTD (Hi-line Timer Drain) which is now well established asan industry standard in condensate removal. The new ZLD range of condensate zero loss drains is part of anew range of drains that operate up to 19,000 m3/hourfor use on dryers, after coolers and receivers.

 

 

 

Example of dryer selection:

Which dryer is required to handle the following worst case conditions?

Maximum compressed air flow of 9 m³/min

Lowest operating pressure of 10 barg

Maximum air inlet temperature of 40°C

Maximum ambient air temperature of 35°C

Corrected Capacity is:

Actual Capacity / (Pc * Ic * Ac) = 9 m³/min / (0.9 * 1.18 * 1.14) = 10.89 m³/min

Dryer Selection is: Tundra 410 for a +3°C PDP

General Information

• Operating pressure range 2 to 16 barg.

• Maximum inlet air temperature 60°C

• Ambient Air temperature : 0°c to 50°c

• Constant +3°C dewpoint delivered at all times, unlike thermal dryers.

• High pressure range available with pressure up to 50 barg.

• Dewpoint Indicator as standard, digital on larger models.

• Illuminated “Power On” switch

• Option of Zero Loss or HTD condensate removal.

 

 

Click here to view and download the full brochure: 

 

 

Expert advice providing you with the most efficient and cost effective solution for your business.

Established in 1963, we have a wealth of experience of new and old technology to offer.

Genuine customer service, professional and honest every time.

Competitive prices all year round.